· The engine shall be Cummins engine in line with the Third National Emissions Law. Cummins engine is widely used in heavy forklift trucks, with sufficient spare parts supply and convenient maintenance.
· Automatic transmission from Dana Corporation in the United States is selected for transmission, which is easy for the driver to operate; The transmission is controlled by TCU with fault diagnosis, which greatly simplifies maintenance and maintenance
· The drive axle is made of German Kessler, which is safe and reliable with large axle load and braking torque; Maintenance-free wet braking
· The hydraulic system adopts the products of Parker Company in the United States. The variable hydraulic system can reduce fuel consumption
· Multi-way valve pilot remote control, good micro-motion characteristics of the door frame, easy operation and labor saving
· The door frame is strong and durable, and the side shifting distance adjusting fork conforms to the type, without the need for another side shifting device
| Type | 单位 | CPCD160-L(Bparagraph) | |
|---|---|---|---|
Engine type | 柴油 | ||
| load rating | kg | 16000 | |
| load centre distance | mm | 1200 | |
| maximum lifting height | mm | 4000 | |
Free lift height | mm | 0 | |
Fork dimensions | mm | 2400×250×100 | |
Mast tilt angle | deg | First 5, last 10 | |
| front overhang | mm | 925 | |
Overhang rear | mm | 795 | |
| boundary dimension | overall length | mm | 7870 |
| total width | mm | 2560 | |
Mast lowered height | mm | 3685 | |
Overhead guard height | mm | 3262 | |
Load-backrest（fork arm carrier）height | mm | 1258 | |
| minimum turning radius | mm | 5175 | |
| RaMinimum width of right-angle stacking passage | mm | 8700 | |
| maximum travelling speed( full load/no-load） | Km/h | 28/30 | |
Max Line Speed (full load/no-load） | mm/s | 320/360 | |
| maximum gradeability(full load/no-load） | % | 28/25 | |
| dead load | kg | 24000 | |
| tyre | front wheel | 12.00-24-20PR | |
| back wheel | 12.00-24-20PR | ||
| tread | front wheel | mm | 1878 |
| rear-wheel | mm | 2020 | |
| wheel base | mm | 3750 | |
| minimum ground clearance | gantry mounting | mm | 250 |
| arframe | mm | 280 | |
| fuel capacity | ltr | 250 | |
| engine parameter | Engine optional | ||
| type | DCEC CUMMINS/QSB6.7-C190 | ||
| rated power | kW/r | 142/2200 | |
| torque capacity | N·m/r | 930/1400 | |
| number of cylinders | 6 | ||
| displacement | L | 6.702 | |
